-40%
Rare BRILUX for DUNHILL Swiss Brass Lift Arm Table LIGHTER 1950s Vtg WORKS Read!
Rare BRILUX for DUNHILL Swiss Brass Lift Arm Table LIGHTER 1950s Vtg WORKS Read!
Rare BRILUX for DUNHILL Swiss Brass Lift Arm Table LIGHTER 1950s Vtg WORKS Read!
Rare BRILUX for DUNHILL Swiss Brass Lift Arm Table LIGHTER 1950s Vtg WORKS Read!
Rare BRILUX for DUNHILL Swiss Brass Lift Arm Table LIGHTER 1950s Vtg WORKS Read!
Rare BRILUX for DUNHILL Swiss Brass Lift Arm Table LIGHTER 1950s Vtg WORKS Read!
Rare BRILUX for DUNHILL Swiss Brass Lift Arm Table LIGHTER 1950s Vtg WORKS Read!
Rare BRILUX for DUNHILL Swiss Brass Lift Arm Table LIGHTER 1950s Vtg WORKS Read!
Rare BRILUX for DUNHILL Swiss Brass Lift Arm Table LIGHTER 1950s Vtg WORKS Read!
Rare BRILUX for DUNHILL Swiss Brass Lift Arm Table LIGHTER 1950s Vtg WORKS Read!
Rare BRILUX for DUNHILL Swiss Brass Lift Arm Table LIGHTER 1950s Vtg WORKS Read!
Rare BRILUX for DUNHILL Swiss Brass Lift Arm Table LIGHTER 1950s Vtg WORKS Read!
Rare BRILUX for DUNHILL Swiss Brass Lift Arm Table LIGHTER 1950s Vtg WORKS Read!
Rare BRILUX for DUNHILL Swiss Brass Lift Arm Table LIGHTER 1950s Vtg WORKS Read!

Rare BRILUX for DUNHILL Swiss Brass Lift Arm Table LIGHTER 1950s Vtg WORKS Read!

$ 157.87

Availability: 58 in stock
  • Brand: Dunhill
  • Country/Region of Manufacture: Switzerland
  • Condition: Used

    Description

    This listing is for a vintage BRILUX for DUNHILL Swiss Brass Lift Arm Table/ pocket lighter. It is believed to be circa 1950, Made in Switzerland by Brilux and distributed by Dunhill. It is a beautifully made brass lighter a with spring lift arm & flint mechanism where the spring is contained in a shaft with a plunger at the end to push the flint - so the spring never gets jammed or damaged. The lighter is finely constructed with a mix of casted and hand-machined parts. It is an excellent piece for collectors of tobacciana, lighters, and more. A great gift, or item for personal use/ display.
    It is in very good condition, with a strong spring still. I have not deeply cleaned it to avoid removing any of the pleasing patina it has acquired. It sparks when you trigger the mechanism, I have not replaced the flint (which I assume to be original), and am unsure how many more uses it has. I also, in an attempt to keep it clean as possible, have not put any lighter fluid in it. The wick is perfectly dry, and I assumed the inside is clean & also dry. I would assume that with the addition of fluid, it would work perfectly. It has a few spots that could be cleaned off at the buyers discretion. It is Stamped "Swiss Made" on the underside.
    Rough Measurements: 2 3/4" x 3 1/8" x 2"
    Thank you for your consideration, reasonable offers always considered. Comes as shown, please see photos for details and measurements. Comes packed with care, insured in shipment.